Kitchen Aid Refrigerator Drawer Hard Pull
KitchenAid Refrigerator Drawers and Glides
Find your part
Enter your model number or a part number and click "Search"
Here is an example model number plate:
Popular KitchenAid Refrigerator Drawers and Glides
Refrigerator Crisper Drawer with Humidity Control
PartSelect Number PS11739119
Manufacturer Part Number WP2188656
The crisper drawer (Crisper Pan, Refrigerator Crisper Drawer) with humidity control is meant to keep your vegetables and fruit as fresh as possible by allowing you to regulate the humidity levels within the drawer. It attaches on the inside of your refrigerator to the bottom of the crisper shelf. This drawer can break from misuse or accidental damage. It is also subject to material fatigue over time. If broken or damaged, it may be difficult to slide the drawer in and out, and it should be replaced. This plastic drawer measures 14.92 inches long, 7.6 inches high, and 16.5 inches wide and comes in white/clear.
Fixes these symptoms
- Clicking sound
- Door Sweating
- Door won't open or close
- See more...
Installation Instructions
JULIA from BRONX, NEW YORK, NY
replacing parts only
the prices you had were great, now I see there was an increase in the parts.
thank you Read more...
Refrigerator Center Crisper Drawer Slide Rail - White
PartSelect Number PS11757048
Manufacturer Part Number WPW10671238
This is a center crisper rail for your refrigerator. This part acts as a support rail for the crisper drawer by holding the center of the crisper frame. You will need to replace this part is if your current drawer is not opening or closing properly. This crisper rail is white and it is made entirely of plastic. It is roughly 13.5 inches long, and 2.5 inches wide. This is an easy repair which requires no tools.
Fixes these symptoms
- Door won't open or close
- Fridge and Freezer are too warm
- Leaking
- See more...
Installation Instructions
Ruth from Roxbury, MA
Cracked & Snapped Center Crisper Rail
A very easy fix took all of five minutes Read more...
Pantry End Cap Kit, LH and RH
PartSelect Number PS11738134
Manufacturer Part Number W10874836
This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance's pantry drawer to help contain the items inside and to keep your refrigerator door from sliding all the way out. It is rated as "medium" difficulty to install, is constructed of plastic and comes in white. If broken or missing, the pantry drawer will not stay in place and the part should be replaced. Refer to your user manual and model number to ensure this is the correct part for you. This kit includes both the right and left side end caps, as well as the pins that will hold them in place. To replace an end cap, remove the three screws holding it in place. Then, remove the pin and end cap, replacing the old end cap with the new end cap. In the past, the left and right end caps were sold separately, but the part has been updated and now includes both sides. The part is sold as a kit, and unfortunately, as such none of the parts are available individually.
Fixes these symptoms
- Door won't open or close
- Fridge too cold
- Noisy
- See more...
Installation Instructions
Tim from Littleton, CO
The poorly designed deli drawer lid tab broke off
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in. Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Center Rail
PartSelect Number PS11752912
Manufacturer Part Number WPW10326469
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Refer to your model number and user manual to see if this part will be right for your appliance. This part is a very easy repair which only takes a few minutes and does not require any tools. Just slide the crisper drawers out, lift out the glass shelf, slide the new rale into place and replace the glass shelf and crisper drawers. This part is sold individually and not as part of a set.
Fixes these symptoms
- Door won't open or close
- Noisy
- See more...
Installation Instructions
Robert from Meriden, CT
Crisper frame center rail failure
Remove Crisper drawers from Bottom Shelf. Total repair time less than one minute.
Remove glass from the top of Bottom Shelf.
Drop new Crisper frame center rail into slots on the top of the Bottom Shelf shelf.
Replace glass onto the top of the Bottom Shelf.
Slide drawers between left and right guides and the Crisper frame center rail.
No tools required.
Refrigerator Crisper Drawer With Handle
PartSelect Number PS11739122
Manufacturer Part Number WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
Fixes these symptoms
- Door won't open or close
- See more...
Installation Instructions
Betty from Orinda, CA
Previous owners of the condo took the two drawers from the refrigerator
No repair, just slid the drawers in their places.
Since you had a diagram of the refrigerator parts, ordering the parts was easy and I was confident that the parts were the correct ones. Read more...
Crisper Drawer
PartSelect Number PS11743502
Manufacturer Part Number WP67002659
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator door does not open or close properly, which is a sign that your cripser drawer is damaged. This crisper drawer is made of clear plastic and is roughly 20 inches in length. This part is sold individually and does not come with the plastic faceplate on it. If your current crisper has one, you will need to remove it and transfer it to the new crisper. NOTE: As per the manufacture the crisper drawer has been updated from the original. A new crisper cover may need to be purchased for the drawers to work. Factory dimensions - 12.847" Depth X 15.217" Width X 6.93 High.
Fixes these symptoms
- Door won't open or close
- See more...
Installation Instructions
Roland from Alexandria, VA
The crisper drawers had cracked runners
Crisper drawers: Ice & Water filter
1. Removed crisper drawers from refrigerator.
2. Removed drawer front decoration panels.
3. Unpacked, inspected and rinsed out new drawers.
4. Attached drawer front decoration panels.
5. Transfered vegetables and fruit from old drawers to new drawers.
6. Installed new drawers in refrigerator.
7. Closed refrigerator door.
8. Total time about 15 minutes, no tools required.
1. Opened filter compartment cover
2. Removed old filter, drained into sink and placed in the trash.
3. Installed new filter
4. Bled the water line with ice water tap button (be aware when the air in the line exits the spigot, it create a lot of spray and you may need to cleanup the water that splash out of the bottom of the container used to capture the water during the bleeding process.)
5. Close the filter cover and refrigerator door.
6. Total time about 10 minutes and no tools required.
Refrigerator Pantry Drawer Lid
PartSelect Number PS11723195
Manufacturer Part Number W10827914
Fixes these symptoms
- Door won't open or close
- See more...
Installation Instructions
JAMES from AMSTERDAM, NY
pantry drawer and track where broke
took the pantry drawer out removed track replaced and put on new door... very simple Read more...
Refrigerator Crisper Drawer
PartSelect Number PS11731260
Manufacturer Part Number W10854037
The crisper drawer is clear plastic and is located inside the refrigerator. It is used to store fruits and vegetables at a certain temperature to ensure food will last longer. If your drawer is cracked, broken, or even getting stuck, this replacement could be the solution. First, open your refrigerator door and remove all the items from the crisper. Remember to remove the escutcheon from the old crisper and transfer onto the new crisper drawer by sliding and snapping it on. Refer to the instruction guide provided by the manufacturer for more detail and guidance.
Fixes these symptoms
- Door won't open or close
- Leaking
- See more...
Installation Instructions
Julie from Oak Park, MI
Drawers were cracked, trim had fallen off.
No need for tools. Read more...
Pantry End Cap - Right Side
PartSelect Number PS11738568
Manufacturer Part Number WP12656018
This part mounts on the wall and is used to support the pantry drawer.
Fixes these symptoms
- Door won't open or close
- Fridge too cold
- See more...
Installation Instructions
Gregory from Bethesda, MD
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regulator to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it. Read more...
Pantry End Cap - Left Side
PartSelect Number PS11738573
Manufacturer Part Number WP12656105
The pantry end cap is also known as a drawer support or a door shelf trim. This specific piece is sold individually and is meant for the left side of your refrigerator. It snaps into place on the door of your fridge, which allows it to hold items on the door shelf. To change the left side end cap on your refrigerator you will need a 1/4 inch nut driver. Users have ranked this installation as easy to do, with a less than thirty minute repair time.
Fixes these symptoms
- Door won't open or close
- See more...
Installation Instructions
Gregory from Bethesda, MD
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regulator to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it. Read more...
Related Parts
- All KitchenAid Refrigerator parts
- KitchenAid Refrigerator Brackets and Flanges
- KitchenAid Refrigerator Caps and Lids
- KitchenAid Refrigerator Circuit Boards and Touch Pads
- KitchenAid Refrigerator Compressors
- KitchenAid Refrigerator Deflectors and Chutes
- KitchenAid Refrigerator Dispensers
- KitchenAid Refrigerator Doors
- KitchenAid Refrigerator Drip Bowls
- KitchenAid Refrigerator Ducts and Vents
- KitchenAid Refrigerator Elements and Burners
- KitchenAid Refrigerator Fans and Blowers
- KitchenAid Refrigerator Filters
- KitchenAid Refrigerator Grates
- KitchenAid Refrigerator Grilles and Kickplates
- KitchenAid Refrigerator Handles
- KitchenAid Refrigerator Hardware
- KitchenAid Refrigerator Hinges
- KitchenAid Refrigerator Hoses and Tubes
- KitchenAid Refrigerator Ice Makers
- KitchenAid Refrigerator Insulations
- KitchenAid Refrigerator Knobs
- KitchenAid Refrigerator Lights and Bulbs
- KitchenAid Refrigerator Motors
- KitchenAid Refrigerator Seals and Gaskets
- KitchenAid Refrigerator Springs and Shock Absorbers
- KitchenAid Refrigerator Switches
- KitchenAid Refrigerator Tanks and Containers
- KitchenAid Refrigerator Thermostats
- KitchenAid Refrigerator Trays and Shelves
- KitchenAid Refrigerator Trims
- KitchenAid Refrigerator Valves
- KitchenAid Refrigerator Wheels and Rollers
- KitchenAid Refrigerator Wire Plugs and Connectors
Kitchen Aid Refrigerator Drawer Hard Pull
Source: https://www.partselect.com/KitchenAid-Refrigerator-Drawers-and-Glides.htm